Please come on over to my new blog and follow me there -
http://thenon-craftycrafter.blogspot.com.au/

I'll be transferring information to there from this blog as I get time. Any new tutorials/info will be posted there!


Friday 28 December 2007

Welding inside a shape

Update: More recent version of DS allow you to weld objects inside ready made frames. You may still have trouble getting some parts of the object to cut however. Here's some info on how to fix that problem. http://myfaqcricutds.blogspot.com/2008/02/more-on-welding-inside-frame-burping.html

The following information is still relevant however, if you can't find the correct ready made frame for your project....




Who would have thought welding an object inside a shape could be so difficult? Many of us have tried and unfortunately it's not as easy as it should be. The trick is that you can't actually weld inside a frame. But you can make your own "frame" and weld inside that. Here is a step by step pictorial on how to do it. For this example I have used the George/Basic Shapes cartridge for both the frame and the object inside it.

Click Shift Lock on the DS keypad.

Click on the thin rectangle button key (below the question mark).



Click on your shape and using the Vertical Stretch handle, stretch the rectangle to the length you want your frame to be. Then using the Horizontal stretch handle, stretch/shrink the rectangle to the correct width.








Copy this shape (Edit, Copy/Ctrl C/ ) then Paste (Edit, Paste/Ctrl V/ ).

A new rectangle will be pasted on top of the original rectangle.


While this rectangle is still selected (i.e. you can see the selection handles) click the Turn 90 button once.

This will flip the rectangle horizontally.










Using the Free Move handle, move it up to meet the top of the vertical rectangle.

This will form the top of your frame.

Using the Horizontal Stretch handle, stretch this rectangle until it is the correct length.

(Note, when you use the stretch tool on the vertical shape, it stretches in one direction. When you stretch a horizontal shape it stretches from both ends).


Using the Free Move handle, position the top rectangle so that it meets the left rectangle.

Select each shape in turn and click Weld on both.

Click the Preview button to make sure your welding has worked. Remember, only the bold lines are the cutting lines.




Select the top rectangle and select Copy.


Select Paste, then using the down arrow on your computer keyboard, move that rectangle to the bottom of the vertical rectangle.

When you are close, hold down the CTRL key on your keyboard while clicking the down arrow. this will move your shape in smaller increments. You can also hold down the ALT key while moving your shapes to make the Selection handles disappear. This makes the placement of your objects easier. You may also find it easier to make small adjustments if you change your view to 200%.

You have now formed the bottom edge of your frame. Check that the bottom rectangle has the Weld option ticked.

NOTE: Don't be tempted to create the right hand rectangle yet because for some reason it won't weld properly if you do!

Now it's time to insert your shape. For this example I've used a star - also from the George cartridge.

Click on the first star shape on the DS keypad. This will insert a star onto the mat.













Select the star and using the Free Move handle move it inside the 3 rectangles so that the top point and the left point touch the top and left edges of the rectangle.








Using the Scale handle stretch the star until most of the points of the star meet the edges of the rectangles.



While the star is selected click Weld.













Now you can add the final side to the frame.

Select the left hand vertical rectangle and copy and paste it. Move the pasted rectangle over to the right side until it meets the two horizontal rectangles. Adjust the placement as necessary.


Again, check that it is welded.

Click the Preview button. You should have something that looks like this:



If any of the points of the star don't touch the side of the frame, you can use the Vertical and Horizontal stretch handles. However, it's not necessary that ALL the points touch the frame. It will just give you a different look if they don't.


Click Preview again to check your welding. Remember, only the DARK lines are the cutting lines.

Use the same process if you want to weld a word inside your frame. Just remember that everything must be welded.

Here's some more examples:






With this example I did the flower first and built the frame around it. Just remember to weld everything and add the right hand side of the frame last!

If for some reason your welding isn't working, delete the right hand side of the frame (select it and press the delete key) then undelete it (CTRL Z or Edit, Undo Delete Shapes).








And here's a great example from AnointedHands:



12 comments:

Anonymous said...

I could not for the life of me figure this out! Thanks for sharing!!! I'm definitely a visual learner. I would've never gotten this otherwise!

Iris said...

Thanks so much for sharing these instructions.

For some reason I still need to delete the right side and then undelete, but otherwise it works great.

Marjorie said...

I love that you have pictures from the very start so I can see how to do this. I do need to see it on the mat, so this is great. I am out of town at present for 6 weeks, but will certainly try this when I get home. Thank you so very much for sharing the instructions w/pictures!!

Anonymous said...

Your descriptions are just clear and concise.

Thanks for sharing with all of us!

Patsy B. said...

Thanks a million times! I would have never figured out this procedure on my own. You are great!

Jannina said...

Thank you so much for the detailed steps. I can't wait to try my own designs.

Unknown said...

OMG! Great info. Thanks so much for sharing. I'm totally inspired!

auntysue said...

I am still having trouble. I am trying to make luggage tags - about 50. i am using tags, bags AND accent essentials cart. I cannot get the two designs to become ONE so I can duplicate and copy.

Narelle said...

If you're trying to group the objects so they can be moved together that can't be done. There's no group feature in DS yet.

You will have to copy and paste each part of the design separately.

Brian Trump said...

Great article. I still don't quite understand it fully, but Cricut is something I've been working studying for a while. I wish it was as easy as using my trusty old Miller plasma cutter

trynout said...

I have been trying to create a certain page and cannot! I can follow along, but what I would like is the word love t o stay and everything else behind it gone. kind of like a lazer cut. I would like to take a 12 x 12 page and have the words stay but the negative images gone. I would like to do a wedding page with the words Love on the left side of page and honor on Top of the Page and cherish going down the page and a date on the bottom of the page. But what I am finding is the image cuts out, I need to to stay and cut around it?????? HELP????

Narelle said...

Did I get back to you on this? I remember putting something together in DS but can't find where I replied to you?

Post a Comment